RMG sector is the large & essential sector in the world. Moreover, there is no ending knowledge & lot of things in this sector. So, nobody think how much complexity in this sector. It is not easy to learn in this sector. Today, I want to explain a small idea of basic long pant measurement. After read this article hopefully everybody can get a good idea of a long pant measurement.
Full Length:
This measurement is not essential to get correct measurements, but it is certainly helpful, because it can be difficult to determine if the measurement you are taking is straight down the leg. Moreover, measure top of waist band to ankle is the full length.
Waist band:
Waist band is the upper part of pant. Moreover, align the front and the back of the waistband & measure straight on the top.
Front Rise:
Front rise is the part of lay the crotch area flat and straight and measure from the top of the waistband to the inseam.
Back Rise:
The back rise is from the crotch seam to the top of waistband in the back.
Hip:
Hip is the lower of waist band. In addition, measure the hip from end to end, at 6 inches from the top front waistband.
Inseam:
Inseam is the lower part of front rise. Moreover, place the measuring tap at the center of the crotch and measure down to the very edge of the hem by following the inseam.
Out Seam:
It is measure your pant outseam from the top of the waist band to the desired length down the outside side of the leg.
Leg Opening:
Basically, it places the opening of bottom leg and measures it from side to side.
Bottom Hem height:
Basically,hem height is the bottom width of the hem.
Md.Mahbub-Ul Islam
RMG Consultant & Researcher
mahbub@textilemerchandise.com
